COMMERCIAL LIGHTING
-
LEDQuant
4"/6" Round Flush Mount Thin Ceiling LED Disc Light, 12 Watt, 900 Lumens, Dimmable, Wet Location, ETL, Enegry Star Listed
$15.99
vLEDQuant
$15.99
Visit product page →The new 4"/6" flush mount disc light has an integrated LED power supply and thermal management system combined in a single compact unit. Designed to fit most standard 4", 5" and 6" recessed cans, also works in a 4" junction box.
FEATURES
▪ Uses 1.18W high power, high quality LEDs.
▪ Choice of 2700K, 3000K, 3500K, 4000K or 5000K color temperature with 80 CRI.ELECTRICAL▪ Dimmable down to 10% with most dimmers.▪ Save 75% compared to incandescent sources.
▪ High efficiency driver with a power factor > 0.9
▪ Built-in LED driver.
▪ Voltage: 120V, 50- 60Hz.
▪ Power Consumption: 12 Watts.
▪ Operation temperature of -20°C to - 40°C (-4°F - 104°)
* Contact factory for other color temperatures and lumen packages.
** L 70 hours are IES TM-21-11 calculated hours.MOUNTING
▪ Easy installation with 4" to 6" recessed cans.
▪ Cut-off for 4" junction box mounting, using mounting
bracket (surface mount).HOUSING▪ Surface mount disk used with 4", 5" and 6" housings.
▪ Compatible with insulated, non-insulated and
air-tight ceilings.
▪ Durable thermoplastic construction.
▪ E26 medium screw-base Edison connector provides easy retrofit of incandescent housings.WARRANTY/LISTING▪ Tested in accordance with IESNA LM79 & LM80.
▪ ETL Listed for Wet locations in the USA and Canada.
▪ ENERGY STAR qualified.
▪ Passes FCC Class B.
▪ ROHS Compliant.
▪ 5-Year Warranty on all electrical and housing. -
LEDQuant
4"/6" Round Flush Mount Thin Ceiling LED Disc Light, 12 Watt, 900 Lumens, Dimmable, Wet Location, ETL, Enegry Star Listed
$15.99
vLEDQuant
$15.99
Visit product page →The new 4"/6" flush mount disc light has an integrated LED power supply and thermal management system combined in a single compact unit. Designed to fit most standard 4", 5" and 6" recessed cans, also works in a 4" junction box.
FEATURES
▪ Uses 1.18W high power, high quality LEDs.
▪ Choice of 2700K, 3000K, 3500K, 4000K or 5000K color temperature with 80 CRI.ELECTRICAL▪ Dimmable down to 10% with most dimmers.▪ Save 75% compared to incandescent sources.
▪ High efficiency driver with a power factor > 0.9
▪ Built-in LED driver.
▪ Voltage: 120V, 50- 60Hz.
▪ Power Consumption: 12 Watts.
▪ Operation temperature of -20°C to - 40°C (-4°F - 104°)
* Contact factory for other color temperatures and lumen packages.
** L 70 hours are IES TM-21-11 calculated hours.MOUNTING
▪ Easy installation with 4" to 6" recessed cans.
▪ Cut-off for 4" junction box mounting, using mounting
bracket (surface mount).HOUSING▪ Surface mount disk used with 4", 5" and 6" housings.
▪ Compatible with insulated, non-insulated and
air-tight ceilings.
▪ Durable thermoplastic construction.
▪ E26 medium screw-base Edison connector provides easy retrofit of incandescent housings.WARRANTY/LISTING▪ Tested in accordance with IESNA LM79 & LM80.
▪ ETL Listed for Wet locations in the USA and Canada.
▪ ENERGY STAR qualified.
▪ Passes FCC Class B.
▪ ROHS Compliant.
▪ 5-Year Warranty on all electrical and housing. -
Visit product page →10 Watt Outdoor LED Flood Light, Energy Efficient. Reduced energy consumption by up to 80%. 2 year guarantee.
Power Consumption 10W Traditional Equivalent 50W Luminous Flux (lm) 800 Lm LED Brand Epistar IP Rating IP 65 Material Aluminum Alloy Plug No Light Temperature Warm White (3000-3200K) Input Voltage 85-265V AC Beam angle 120° Lamp Color Grey Length 4.4in (112.0mm) Height 3.31in (84mm)
Depth 3.27in (83mm)
-
LEDQuant
10W 4-inch DimmableRound LED Panel Light Ultra-thin LED Recessed Ceiling Lights for Home Office Commercial Lighting, UL, ENERGY STAR
$23.49
vLEDQuant
$23.49
Visit product page →Energy efficient LED Flat Square Retrofit kit provides quick and easy installation with no can required. Durable powder-coated diecast trim with enclosed J-box is attached with a water-tight connection. Pre-installed plastic clips included.
FEATURES
▪ 120V Dimmer standard, 50/60Hz.
▪ Dimmable down to 5% with most market dimmers.
▪ Use for recessed applications with drywall or drop tile ceilings (no recessed can needed).
▪ Small, lightweight J-box standard.
▪ Long life, 50,000 hour LEDs.
▪ -30°C ~ 40°C (-22°F ~ 104°F) operating temperature. -
LEDQuant
11W 4-inch Dimmable Square LED Panel Light Ultra-thin LED Recessed Ceiling Lights for Home Office Commercial Lighting, IC-Rated, UL, ENERGY STAR
$23.49
vLEDQuant
$23.49
Visit product page →Energy efficient LED Flat Square Retrofit kit provides quick and easy installation with no can required. Durable powder-coated diecast trim with enclosed J-box is attached with a water-tight connection. Pre-installed plastic clips included.
FEATURES
▪ 120V Dimmer standard, 50/60Hz.
▪ Dimmable down to 5% with most market dimmers.
▪ Use for recessed applications with drywall or drop tile ceilings (no recessed can needed).
▪ Small, lightweight J-box standard.
▪ Long life, 50,000 hour LEDs.
▪ -30°C ~ 40°C (-22°F ~ 104°F) operating temperature. -
Visit product page →10 Watt Outdoor LED Flood Light, RGB, Color Changing, Energy Efficient. Reduced energy consumption by up to 80%. Remote Control & Power supply included, 2 year guarantee.
SKU Number FL-10W-RGB Power Consumption 10W Traditional Equivalent 50W Luminous Flux (lm) 900 Lm Certifications CE & ROHS IP Rating IP 65 Material Aluminum Alloy Plug No Light Color RGB Input Voltage 110-240V AC Beam angle 120° Lamp Color Black Length 4.33in (110.0mm) Height 3.35in (85mm)
Depth 3.35in (85mm)
-
LEDQuant
16W 6-inch Dimmable Square LED Panel Light Ultra-thin LED Recessed Ceiling Lights for Home Office Commercial Lighting, IC-Rated, UL, ENERGY STAR
$35.99
vLEDQuant
$35.99
Visit product page →Energy efficient LED Flat Square Retrofit kit provides quick and easy installation with no can required. Durable powder-coated diecast trim with enclosed J-box is attached with a water-tight connection. Pre-installed plastic clips included.
FEATURES
▪ 120V Dimmer standard, 50/60Hz.
▪ Dimmable down to 5% with most market dimmers.
▪ Use for recessed applications with drywall or drop tile ceilings (no recessed can needed).
▪ Small, lightweight J-box standard.
▪ Long life, 50,000 hour LEDs.
▪ -30°C ~ 40°C (-22°F ~ 104°F) operating temperature. -
LEDQuant
15W 6-inch DimmableRound LED Panel Light Ultra-thin LED Recessed Ceiling Lights for Home Office Commercial Lighting, UL, ENERGY STAR
$35.99
vLEDQuant
$35.99
Visit product page →Energy efficient LED Flat Square Retrofit kit provides quick and easy installation with no can required. Durable powder-coated diecast trim with enclosed J-box is attached with a water-tight connection. Pre-installed plastic clips included.
FEATURES
▪ 120V Dimmer standard, 50/60Hz.
▪ Dimmable down to 5% with most market dimmers.
▪ Use for recessed applications with drywall or drop tile ceilings (no recessed can needed).
▪ Small, lightweight J-box standard.
▪ Long life, 50,000 hour LEDs.
▪ -30°C ~ 40°C (-22°F ~ 104°F) operating temperature. -
Visit product page →The CLMAL series is a group of premium architectural LED multi-purpose area luminaires designed to illuminate parking lots, pathways, building facades, loading docks, and a wide variety of other large, general site lighting applications. Multiple mounting options make the CLMAL a versatile luminaire for flood lighting, pole-, ground- and wall-mounted are lighting, and other outdoor lighting requirements.
FEATURES▪ Available in 3000k (warm white), 4000k (neutral white) and 5000k (cool white) color temperatures.*
▪ Long-life LEDs provide 372,000 hours of operation with at least 70% of initial lumen output (L70).**
▪ CLMAL-15 provides 1,593 lumens (114 lumens per watt, LPW) at 3000k; 1,603 lumens (115 LPW) at 4000k; and 1,624 lumens (116 LPW) at 5000k.*
▪ Standard optic provides an IES roadway type V distribution, or a 7V (vertical) x 7H (horizontal) NEMA floodlight distribution.
▪ Universal 120-277 AC voltage (50-60Hz) is standard.
▪ Power factor > 0.90.
▪ Total harmonic distortion < 20%.
▪ Color rendering index > 80.
▪ Optional glare shields (full & half) & wire guards are available.
▪ Die cast aluminum housing with durable, dark bronze powder coat finish—at least 2 mils thick on all surfaces—and a heat-resistant polycarbonate lens.
▪ Wireway enclosure is sealed with a water-tight, silicon rubber gasket.
▪ Effective projected areas (EPA's) are:
- Front = 0.05 s.f. (knuckle) / 0.06 s.f. (yoke)
- Side = 0.07 s.f. (knuckle & yoke)
- Face = 0.20 s.f. (knuckle) / 0.23 s.f. (yoke)
▪ Easy installation in new construction or retrofit applications.
* contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.
WARRANTY & LISTINGS• cULus listed for wet locations in ambient temperatures from -20°C to 45°C (-4°F to 113°F).
• IP66 rated for ingress protection.
• DLC premium approved.
• Rated for 3G vibration.
• Lens is IK 8 rated for protection from external impacts.
• Salt fog tested for 1,000 hours (ASTM B117). After salt fog testing, paint rated at 9 per ASTM D1654-05 scratch test.
• Complies with FCC Part 15, class B.
• Complies with EN61000-4-5, surge immunity protection (2.5kV).
• 5-Year Warranty of all electronics and housing.MOUNTING OPTIONS
• Yoke-mounted option provides secure attachment to flat surfaces.
• Aluminum die-cast knuckle-mount option is installed on a junction box. Includes ½” NPS stem with locking nut. -
Visit product page →20 Watt LED Outdoor Flood Light, Cool White, Energy Efficient. Reduced energy consumption by up to 80%. 2 year guarantee.
SKU Number FL-20W-CW Power Consumption 20W Traditional Equivalent 80W Luminous Flux (lm) 1800 Lm LED Brand Bridgelux IP Rating IP 65 Material Aluminum Alloy Plug Yes Color temperature Cool White (6000K) Input Voltage 85-265V AC Certificates CE, RoHS Warranty 2 years Length 7.13in (181mm) Width 5.51in (140mm)
Height 4.33in (110mm)
-
LEDQuant
9" Flush Mount LED Disc Light 18W 1100 Lm CCT Selectable Dimmable Damp Location ETL Energy Star
$44.99
vLEDQuant
9" Flush Mount LED Disc Light 18W 1100 Lm CCT Selectable Dimmable Damp Location ETL Energy Star
$44.99
Visit product page →The new 9" flush mount disc light has an integrated LED power supply and thermal management system combined in a single compact unit.
FEATURES
▪ Field selectable 2700k (soft white), 3000k (warm white), 3500k (warm/neutral white), 4000k (neutral white), and 5000k (cool white) color temperatures.*
▪ Long-life LEDs provide at least 70% of initial lumen output (L70) for 119,000 hours of operation.**
▪ Color rendering index (Ra) > 90.
▪ 1,100 nominal lumens.
▪ 18 nominal watts.
▪ Input voltage = 120V 60Hz.
▪ Power factor > 0.90.
▪ Triac dimming.
▪ Aluminum housing.
▪ White, nickel, or bronze housing color.
▪ Glass lens.
▪ Easy installation in new construction or remodel applications.
▪ This device is not intended for use with emergency exits.
WARRANTY/LISTING▪ cETLus listed for damp locations in ambient temperatures of -15°C to 40°C (5°F to 104°F).
▪ Energy Star qualified.
▪ Title 24 qualified.
▪ Complies with FCC Part 15, class B.
▪ Input transient protection = 2.5kV.
▪ 5-year warranty of all electronics and housing.COMPATIBLE DIMMERS
LUTRON DVCL-153PR-WH
LUTRON CTCL-153PDH-WH
LUTRON TGCL-153PH-WH
LUTRON MACL-153MH-WH
LUTRON P-PKG1W-WH-R
LEVITON R62-06674-P0W
LEVITON R12-06672-1LW
LEVITON R50-IPL06-10M
EATON SAL06P-LA-K -
Visit product page →The CLLS series is a group of 2’, 3’, 4’ and 8’ covered strip lights, which are designed as direct replacements for fluorescent strips. The CLLS series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability.
FEATURES
• Available in 3500k (warm/neutral white), 4000k (neutral white) and 5000k (cool white) color temperatures.*
• Long-life LEDs provide up to 122,000 hours of operation with at least 70% of initial lumen output (L70).**
• Uniform illumination with no visible LED pixilation
• Universal 120-277 AC voltage (50-60Hz) is standard
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%
• Color rendering index > 80.
• Steel housing and acrylic lens.
• Easy installation in new construction or retrofit.* contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.WARRANTY/LISTING
• cULus approved for damp locations (-20°C to 50°C / -4°F to 122°F).
• DLC premium approved.
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• Complies with FCC Part 15 class A.
• Complies with IEEE C.62.41-1991, Class A input transient surge protection (2.5kV).
• Complies with IEEE 61000-4-2 level 2 (4kV) electrostatic discharge (ESD). -
Visit product page →The CLLSH series is a group of 2’, 3’, 4’ and 8’ slim strip lights, which are designed as direct replacements for fluorescent strips. The CLLSH series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability.
FEATURES
• CLLSH2 provides 2,582 luminaire lumens
(129 lumens per watt, LPW) at 3500k; 2,592 luminaire
lumens (130 LPW) at 4000k; and 2,613 luminaire lumens (131 LPW) at 5000k.*
• CLLSH3 provides 3,138 luminaire lumens
(126 LPW) at 3500k; 3,154 luminaire lumens (126 LPW) at 4000k; and 3,186 luminaire lumens (127 LPW) at 5000k.*
• CLLSH4 provides 4,278 luminaire lumens (130
LPW) at 3500k; 4,313 luminaire lumens (131 LPW) at
4000k; and 4,382 luminaire lumens (133 LPW) at 5000k.*
• CLLSH8 provides 8,129 luminaire lumens (131 LPW) at 3500k; 8,131 luminaire lumens (131 LPW) at
4000k; and 8,135 luminaire lumens (131 LPW) at 5000k.*
• Uniform illumination with no visible LED pixelation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.* contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.WARRANTY/LISTING
• cETLus listed for damp locations in ambient temperatures from 20°C to 50°C (-4°F to 122°F).
• DLC premium approved.
• Flicker-free per IEEE1789-2015 (low risk of adverse effects of flicker at 100% light output level).
• Complies with FCC Part 15, Class B (except for
CLLSH8, which has Class A compliance).
• Complies with IEEE C.62.41-1991, Class A input transient surge protection (2.5kV).
• Complies with RoHS (Restriction on Hazardous
Substances) requirements.
• 5-Year Warranty of all electronics and housing. -
Visit product page →The CLMAL series is a group of premium architectural multi-purpose LED area luminaires designed to illuminate parking areas, pathways, building facades, loading docks, and a wide variety of other large, general site lighting applications. Multiple mounting options make the CLMAL a versatile luminaire for flood lighting, pole-, ground- and wall-mounted are lighting, and other outdoor lighting requirements.
FEATURES▪ Available in 3000k (warm white), 4000k (neutral white) and 5000k (cool white) color temperatures.*
▪ Long-life LEDs provide 372,000 hours of operation with at least 70% of initial lumen output (L70).**
▪ CLMAL-30 provides 3,404 lumens (113 lumens per watt, LPW) at 3000k; 3,427 lumens (114 LPW) at 4000k; and 3,432 lumens (114 LPW) at 5000k.*
▪ Standard optic provides an IES roadway type V distribution, or a 7V (vertical) x 7H (horizontal) NEMA floodlight distribution.
▪ Universal 120-277 AC voltage (50-60Hz) is standard.
▪ Power factor > 0.90.
▪ Total harmonic distortion < 20%.
▪ Color rendering index > 80.
▪ Optional glare shields (full & half) & wire guards are available.
▪ Die cast aluminum housing with durable, dark bronze powder coat finish—at least 2 mils thick on all surfaces—and a heat resistant polycarbonate lens.
▪ Wireway enclosure is sealed with a water-tight, silicon rubber gasket.
▪ Effective projected areas (EPA's) are:
- Front = 0.12 s.f. (knuckle) / 0.10 s.f. (yoke)
- Side = 0.15 s.f. (knuckle) / 0.09 s.f. (yoke)
- Face = 0.55 s.f. (knuckle) / 0.42 s.f. (yoke)
▪ Easy installation in new construction or retrofit applications.
* contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.
WARRANTY & LISTINGS• cULus listed for wet locations in ambient temperatures from -20°C to 45°C (-4°F to 113°F).
• IP66 rated for ingress protection.
• DLC premium approved.
• Rated for 3G vibration.
• Lens is IK 8 rated for protection from external impacts.
• Salt fog tested for 1,000 hours (ASTM B117). After salt fog testing, paint rated at 9 per ASTM D1654-05 scratch test.
• Complies with FCC Part 15, class B.
• Complies with EN61000-4-5, surge immunity protection (2.5kV).
• 5-Year Warranty of all electronics and housing.MOUNTING OPTIONS
• Yoke-mounted option provides secure attachment to flat surfaces.
• Aluminum die-cast knuckle-mount option is installed on a junction box. Includes ½” NPS stem with locking nut. -
LEDQuant
2x2 FT 36W 4000 Lumens Flat LED Troffer Panel Light 0-10V Dimmable Drop Ceiling Flat Panel Recessed Back-Lit Fixture Rebate Eligible UL & DLC
$59.99
vLEDQuant
$59.99
Visit product page →Ultra-thin, back-lit LED panel designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and retail stores. Perfect choice for new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10VDC dimming capability.
FEATURES
• Available in 3500k, 4000k and 5000k color temperatures.
• Long-life LEDs provide 144,000 hours of operation with at least 70% of initial lumens output (L70).**
• Provides 4,259 to 4,449 luminaire lumens and 118 to 123 lumens per watt*
• Uniform illumination with no visible LED pixilation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%
• Color rendering index > 80.
• Aluminum frame and steel housing backplate.
• PMMA (polymethyl methacrylate) LED lenses for optimal light distribution, efficiency and longevity.
• Standard mounting options include recessed mounting in grid ceilings, or suspended mounting using attached hanging brackets. Optional surface mounting requires a surface mounting kit.
• Easy installation in new construction or retrofit.
• Standard earthquake clips provide secure installation in grid ceilings.
• Standard mounting options include recessed mounting in grid ceilings or suspended mounting using attached hanging brackets. For mounting in plasterer other hard ceilings, see Mounting KitsWARRANTY/LISTINGS
• cULus for damp locations and insulated ceilings (IC-rated). Suitable for ambient temperatures from -20°C to 40°C (-4°F to 104°F).
• DLC premium approved.
• Flicker-free per IEEE1789-2015 (no observable adverse effects of flicker at 100% light output level).
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• Complies with FCC Part 15, class B.
• Complies with EN61000-4-5, surge immunity protection (1kV).
• 5-Year Warranty of all electronics and housing.
MOUNTING KITS
• Optional mounting kits provide for installation in hard ceilings or suspended.DLC Approval is Required for Most Rebate Programs:
This light is DLC approved. The DesignLights Consortium® promotes quality, performance and energy efficient commercial sector lighting solutions through collaboration among its federal, regional, state, utility, and energy efficiency program members, luminaire manufacturers, lighting designers, and other industry stakeholders throughout the US and Canada.
-
Visit product page →The CLLS series is a group of 2’, 3’, 4’ and 8’ covered strip lights, which are designed as direct replacements for fluorescent strips. The CLLS series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability.
FEATURES
• Available in 3500k (warm/neutral white), 4000k (neutral white) and 5000k (cool white) color temperatures.*
• Long-life LEDs provide up to 122,000 hours of operation with at least 70% of initial lumen output (L70).**
• Uniform illumination with no visible LED pixilation
• Universal 120-277 AC voltage (50-60Hz) is standard
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%
• Color rendering index > 80.
• Steel housing and acrylic lens.
• Easy installation in new construction or retrofit.* contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.WARRANTY/LISTING
• cULus approved for damp locations (-20°C to 50°C / -4°F to 122°F).
• DLC premium approved.
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• Complies with FCC Part 15 class A.
• Complies with IEEE C.62.41-1991, Class A input transient surge protection (2.5kV).
• Complies with IEEE 61000-4-2 level 2 (4kV) electrostatic discharge (ESD). -
Visit product page →The CLLS series is a group of 2’, 3’, 4’ and 8’ covered strip lights, which are designed as direct replacements for fluorescent strips. The CLLS series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability.
FEATURES
• Available in 3500k (warm/neutral white), 4000k (neutral white) and 5000k (cool white) color temperatures.*
• Long-life LEDs provide up to 122,000 hours of operation with at least 70% of initial lumen output (L70).**
• Uniform illumination with no visible LED pixilation
• Universal 120-277 AC voltage (50-60Hz) is standard
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%
• Color rendering index > 80.
• Steel housing and acrylic lens.
• Easy installation in new construction or retrofit.* contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.WARRANTY/LISTING
• cULus approved for damp locations (-20°C to 50°C / -4°F to 122°F).
• DLC premium approved.
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• Complies with FCC Part 15 class A.
• Complies with IEEE C.62.41-1991, Class A input transient surge protection (2.5kV).
• Complies with IEEE 61000-4-2 level 2 (4kV) electrostatic discharge (ESD). -
Visit product page →The CLLSH series is a group of 2’, 3’, 4’ and 8’ slim strip lights, which are designed as direct replacements for fluorescent strips. The CLLSH series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability.
FEATURES
• CLLSH2 provides 2,582 luminaire lumens
(129 lumens per watt, LPW) at 3500k; 2,592 luminaire
lumens (130 LPW) at 4000k; and 2,613 luminaire lumens (131 LPW) at 5000k.*
• CLLSH3 provides 3,138 luminaire lumens
(126 LPW) at 3500k; 3,154 luminaire lumens (126 LPW) at 4000k; and 3,186 luminaire lumens (127 LPW) at 5000k.*
• CLLSH4 provides 4,278 luminaire lumens (130
LPW) at 3500k; 4,313 luminaire lumens (131 LPW) at
4000k; and 4,382 luminaire lumens (133 LPW) at 5000k.*
• CLLSH8 provides 8,129 luminaire lumens (131 LPW) at 3500k; 8,131 luminaire lumens (131 LPW) at
4000k; and 8,135 luminaire lumens (131 LPW) at 5000k.*
• Uniform illumination with no visible LED pixelation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.* contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.WARRANTY/LISTING
• cETLus listed for damp locations in ambient temperatures from 20°C to 50°C (-4°F to 122°F).
• DLC premium approved.
• Flicker-free per IEEE1789-2015 (low risk of adverse effects of flicker at 100% light output level).
• Complies with FCC Part 15, Class B (except for
CLLSH8, which has Class A compliance).
• Complies with IEEE C.62.41-1991, Class A input transient surge protection (2.5kV).
• Complies with RoHS (Restriction on Hazardous
Substances) requirements.
• 5-Year Warranty of all electronics and housing. -
Visit product page →The CLLSH series is a group of 2’, 3’, 4’ and 8’ slim strip lights, which are designed as direct replacements for fluorescent strips. The CLLSH series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability.
FEATURES
• CLLSH2 provides 2,582 luminaire lumens
(129 lumens per watt, LPW) at 3500k; 2,592 luminaire
lumens (130 LPW) at 4000k; and 2,613 luminaire lumens (131 LPW) at 5000k.*
• CLLSH3 provides 3,138 luminaire lumens
(126 LPW) at 3500k; 3,154 luminaire lumens (126 LPW) at 4000k; and 3,186 luminaire lumens (127 LPW) at 5000k.*
• CLLSH4 provides 4,278 luminaire lumens (130
LPW) at 3500k; 4,313 luminaire lumens (131 LPW) at
4000k; and 4,382 luminaire lumens (133 LPW) at 5000k.*
• CLLSH8 provides 8,129 luminaire lumens (131 LPW) at 3500k; 8,131 luminaire lumens (131 LPW) at
4000k; and 8,135 luminaire lumens (131 LPW) at 5000k.*
• Uniform illumination with no visible LED pixelation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.* contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.WARRANTY/LISTING
• cETLus listed for damp locations in ambient temperatures from 20°C to 50°C (-4°F to 122°F).
• DLC premium approved.
• Flicker-free per IEEE1789-2015 (low risk of adverse effects of flicker at 100% light output level).
• Complies with FCC Part 15, Class B (except for
CLLSH8, which has Class A compliance).
• Complies with IEEE C.62.41-1991, Class A input transient surge protection (2.5kV).
• Complies with RoHS (Restriction on Hazardous
Substances) requirements.
• 5-Year Warranty of all electronics and housing. -
Visit product page →The CLLSR retrofit strip lights are designed to transform existing fluorescent strips into high performance LED luminaires. The CLLSR series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability.
FEATURES
• Available in 3500k (warm/neutral white), 4000k (neutral white) and 5000k (cool white) color temperatures.*
• Long-life LEDs provide 122,000 hours of operation with at least 70% of initial lumen output (L70).**
• Provides 2,833 luminaire lumens (123 lumens per watt, LPW) at 3500k; 2,990 luminaire lumens
(130 LPW) at 4000k; and 3,013 luminaire lumens (131 LPW) at 5000k.*
• Uniform illumination with no visible LED pixelation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%.
• Color rendering index > 80.
• Steel housing and acrylic lens.
• Easy installation in existing fluorescent strip housings* Contact factory for other color temperatures and lumen packages.
** L70 hours are IES TM-21-11 calculated hours.
WARRANTY/LISTINGS
• cULus approved for damp locations (-20 °C to 50 °C / -4 °F to 122 °F).
• DLC premium approved.
• Complies with FCC Part 15, Class A.
• Complies with IEEE C.62.41-1991, Class A input transient surge protection (2.5kV).
• Complies with IEC 61000-4-2 level 2 (4kV) electrostatic discharge (ESD).
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• 5-year warranty of all electronics and housing. -
vLEDQuant
2x2 FT 32W 4000 Lumens Flat LED Panel Light 0-10V Dimmable Back-Lit Rebate UL & DLC
$64.99
Visit product page →Ultra-thin, back-lit LED panel designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and retail stores. Perfect choice for new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10VDC dimming capability.
FEATURES
• Available in 3500k, 4000k and 5000k color temperatures.
• Long-life LEDs provide 144,000 hours of operation with at least 70% of initial lumens output (L70).**
• Provides 4,174 to 4,293 luminaire lumens and 129 to 134 lumens per watt*
• Uniform illumination with no visible LED pixilation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%
• Color rendering index > 80.
• Aluminum frame and steel housing backplate.
• PMMA (polymethyl methacrylate) LED lenses for optimal light distribution, efficiency and longevity.
• Standard mounting options include recessed mounting in grid ceilings, or suspended mounting using attached hanging brackets. Optional surface mounting requires a surface mounting kit.
• Easy installation in new construction or retrofit.
• Standard earthquake clips provide secure installation in grid ceilings.
• Standard mounting options include recessed mounting in grid ceilings or suspended mounting using attached hanging brackets. For mounting in plasterer other hard ceilings, see Mounting KitsWARRANTY/LISTINGS
• cULus for damp locations and insulated ceilings (IC-rated). Suitable for ambient temperatures from -20°C to 40°C (-4°F to 104°F).
• DLC premium approved.
• Flicker-free per IEEE1789-2015 (no observable adverse effects of flicker at 100% light output level).
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• Complies with FCC Part 15, class B.
• Complies with EN61000-4-5, surge immunity protection (1kV).
• 5-Year Warranty of all electronics and housing.
MOUNTING KITS
• Optional mounting kits provide for installation on plaster or other hard ceilings.DLC Approval is Required for Most Rebate Programs:
This light is DLC approved. The DesignLights Consortium® promotes quality, performance and energy efficient commercial sector lighting solutions through collaboration among its federal, regional, state, utility, and energy efficiency program members, luminaire manufacturers, lighting designers, and other industry stakeholders throughout the US and Canada.
-
Visit product page →The premium-performance CLTR22N is a 2’ x 2’ LED center basket luminaire, which offers industry-leading lumens per watt (LPW), and which is DLC Premium listed. The CLTR22N is designed as a direct replacement for 2’ x 2’ fluorescent luminaires installed in grid ceilings. It is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability.
FEATURES• Available in 3000k (warm white), 4000k (neutral white) and 5000k (cool white) color temperatures.*
• Long-life LEDs provide 81,000 hours of operation with at least 70% of initial lumen output (L70).**
• Provides 3,709 luminaire lumens (124 lumens per watt, LPW) at 3000k, 3,766 luminaire lumens (126 LPW) at 4000k, and 3,823 luminaire lumens (128 LPW) at 5000k.*
• Uniform illumination with no visible LED pixelation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%.
• Color rendering index > 80.
• Steel housing and acrylic lens.
• Easy installation in new construction or retrofit. Fits in standard 2’ x 2’ grid ceilings.
• Standard earthquake clips provide secure installation in grid
ceilings.
*Contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.
WARRANTY/LISTING• UL listed for damp locations and insulated ceilings (IC-rated) for use in ambient temperatures from -25°C to 50°C (-13°F to 122°F).
• DLC Premium listed.
• Complies with FCC Part 15, class B.
• 5-year warranty of all electronics and housing. -
Visit product page →The premium-performance CLTR22D-32 is a low-profile 2’ x 2’ LED center basket luminaire, which offers industry-leading lumens per watt (LPW). The CLTR22D-32 is designed as a direct replacement for 2’ x 2’ fluorescent luminaires installed in grid or plaster ceilings. It is also designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability.
FEATURES
▪ Available in 3000k (warm white), 3500k (warm/neutral white), 4000k (neutral white) & 5000k (cool white) color temperatures.*
▪ Long-life LEDs provide 199,000 hours of operation with at least 70% of initial lumen output (L70).**
▪ Provides 4,195 luminaire lumens (131 lumens per watt, LPW) at 3000k; 4,293 luminaire lumens (134 LPW) at 3500k; 4,371
luminaire lumens (137 LPW) at 4000k; and 4,527 luminaire lumens (141 LPW) at 5000k.*
▪ Uniform illumination with no visible LED pixelation.
▪ Universal 120-277 AC voltage (50-60Hz) is standard.
▪ 0-10vdc dimming capability is standard.
▪ Power factor > 0.90.
▪ Total harmonic distortion < 20%.
▪ Color rendering index > 80.
▪ Steel housing and acrylic lens.
▪ Easy installation in new construction or retrofit. Fits in standard 2’ x 2’ grid ceilings.
▪ Standard earthquake clips provide secure installation in grid ceilings.
▪ Standard mounting options include recessed mounting in grid ceilings, or suspended mounting using attached hanging brackets.* Contact factory for other color temperatures and lumen packages.
** L70 hours are IES TM-21-11 calculated hoursWARRANTY & LISTINGS
▪ UL listed for damp locations and insulated ceilings (IC-rated) for use in ambient temperatures from -20°C to 40°C (-4°F to 104°F).
▪ DLC Premium listed.
▪ Flicker-free per IEEE1789-2015 (low risk of adverse effects of flicker at 100% light output level).
▪ Complies with RoHS (Restriction on Hazardous Substances) requirements.
▪ Complies with FCC Part 15, part B.
▪ Complies with IEEE C.62.41-1991, input transient surge protection (2kV).
▪ 5-year warranty of all electronics and housing. -
Visit product page →50 Watt LED Outdoor Flood Light, Cool White, Energy Efficient. Reduced energy consumption by up to 80%. 2 year guarantee.
SKU Number FL-50W-CW Power Consumption 50W Traditional Equivalent 200W Luminous Flux (lm) 5000 Lm LED Brand Bridgelux IP Rating IP 65 Material Aluminum Alloy Plug No Color temperature Cool White (5500-7000K) Input Voltage 85-265V AC Certificates CE, RoHS Warranty 2 years Life Span 50000 hours Length 11.18in (284mm)
Height 8.82in (224mm)
-
Visit product page →The CLMAL series is a group of premium architectural multi-purpose LED area luminaires designed to illuminate parking areas, pathways, building facades, loading docks, and a wide variety of other large, general site lighting applications. Multiple mounting options make the CLMAL a versatile luminaire for flood lighting, pole-, ground- and wall-mounted are lighting, and other outdoor lighting requirements.
FEATURES• Available in 3000k (warm white), 4000k (neutral white) and 5000k (cool white) color temperatures.*
• Long-life LEDs provide 230,000 hours of operation with at least 70% of initial lumen output (L70).**
• CLMAL-50 provides 5,717 lumens (117 lumens per watt, LPW) at 3000k; 5,778 lumens (118 LPW) at 4000k; and 5,793
lumens (118 LPW) at 5000k.*
• Standard optic provides an IES roadway type V distribution, or a 7V (vertical) x 7H (horizontal) NEMA floodlight distribution.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%.
• Color rendering index > 80.
• Optional glare shields (full & half) & wire guards are available.
• Die cast aluminum housing with durable, dark bronze powder coat finish—at least 2 mils thick on all surfaces—and a heat-resistant polycarbonate lens.
• Wireway enclosure is sealed with a water-tight, silicon rubber gasket.
• Effective projected areas (EPA’s) are:
- Front = 0.15 s.f. (knuckle) / 0.13 s.f. (yoke)
- Side = 0.18 s.f. (knuckle) / 0.13 s.f. (yoke)
- Face = 0.73 s.f. (knuckle) / 0.57 s.f. (yoke)
• Easy installation in new construction or retrofit applications.
* contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.
WARRANTY & LISTINGS• cULus listed for wet locations in ambient temperatures from -20°C to 45°C (-4°F to 113°F).
• IP66 rated for ingress protection.
• DLC premium approved.
• Rated for 3G vibration.
• Lens is IK 8 rated for protection from external impacts.
• Salt fog tested for 1,000 hours (ASTM B117). After salt fog testing, paint rated at 9 per ASTM D1654-05 scratch test.
• Complies with FCC Part 15, class B.
• Complies with EN61000-4-5, surge immunity protection (2kV).
• 5-year warranty of all electronics and housingMOUNTING OPTIONS
• Yoke-mounted option provides secure attachment to flat surfaces.
• Aluminum die-cast knuckle-mount option is installed on a junction box. Includes ½” NPS stem with locking nut. -
Visit product page →The CLVTL-52 is a surface-mounted LED luminaire, which is designed to prevent the intrusion of moisture and dust. The CLVTL-52 provides general ambient lighting in commercial and industrial settings, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability.
FEATURES
• Available in 3500k (warm/neutral white), 4000k (neutral white) and 5000k (cool white) color temperatures.*
• Long-life LEDs provide 122,000 hours of operation with at least 70% of initial lumen output (L70).**
• Provides 5,307 luminaire lumens (100 LPW) at 3500k;
• Uniform illumination with no visible LED pixelation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• Power factor > 0.95.
• Total harmonic distortion < 10%.
• Color rendering index > 80.
• ABS (acrylonitrile butadiene styrene) housing and polycarbonate lens
• Stainless steel mounting bracket and lens clips are standard.
• Easy installation in new construction or retrofit.*Contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.WARRANTY/LISTING
• cULus listed for wet locations (-20°C to 50°C / -4°F to 122°F).
• IP65 rated for ingress protection.
• DLC premium approved.
• Complies with FCC Part 15, class A.
• Complies with IEEE C.62.41-1991, Class A input transient surge protection (2.5kV).
• Complies with IEC 61000-4-2 level 2 (4kV) electrostatic discharge (ESD).
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• 5-year warranty of all electronics and housing. -
Visit product page →The CLVTL-40 is a surface-mounted LED luminaire, which is designed to prevent the intrusion of moisture and dust. The CLVTL-40 provides general ambient lighting in commercial and industrial settings, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability.
FEATURES
• Available in 3500k (warm/neutral white), 4000k (neutral white) and 5000k (cool white) color temperatures.*
• Long-life LEDs provide 122,000 hours of operation with at least 70% of initial lumen output (L70).**
• Choose from 4,793 luminaire lumens (120 LPW) at 3500k; 5,200 luminaire lumens (130 LPW) at 4000k; and 5,240 luminaire lumens (131 LPW) at 5000k.*
• Uniform illumination with no visible LED pixelation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• Power factor > 0.95.
• Total harmonic distortion < 10%.
• Color rendering index > 80.
• ABS (acrylonitrile butadiene styrene) housing and polycarbonate lens
• Stainless steel mounting bracket and lens clips are standard.
• Easy installation in new construction or retrofit.*Contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.WARRANTY/LISTING
• cULus listed for wet locations (-20°C to 50°C / -4°F to 122°F).
• IP65 rated for ingress protection.
• DLC premium approved.
• Complies with FCC Part 15, class A.
• Complies with IEEE C.62.41-1991, Class A input transient surge protection (2.5kV).
• Complies with IEC 61000-4-2 level 2 (4kV) electrostatic discharge (ESD).
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• 5-year warranty of all electronics and housing. -
LEDQuant
2x4 FT 43W 5000 Lm Flat LED Panel Light 0-10V Dimmable Back-Lit Troffer Fixture Rebate ETL & DLC
$82.99
vLEDQuant
2x4 FT 43W 5000 Lm Flat LED Panel Light 0-10V Dimmable Back-Lit Troffer Fixture Rebate ETL & DLC
$82.99
Visit product page →The ultra-thin, edge-lit LED panel CLFPB24-43 series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10 vdc dimming capability.
FEATURES
• Available in 3500K, 4000K and 5000K color temperatures.
• Long-life LEDs provide 144,000 hours of operation with at least 70% of initial lumens output (L70).**
• CLFPB24-43 provides 5,240 to 5,323 luminaire lumens, and 120 to 122 lumens per watt.
• Uniform illumination with no visible LED pixilation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%
• Color rendering index > 80.
• Aluminum housing.
• PMMA (polymethyl methacrylate) LED lenses for optimal light distribution and efficiency.
• Standard mounting options include recessed mounting in grid ceilings, or suspended mounting using attached hanging brackets. Optional surface mounting requires a surface mounting kit.
• Easy installation in new construction or retrofit.**L70 hours are IES TM-21-11 calculated hours.
WARRANTY/LISTINGS
• ETL listed to applicable U.L. standards for damp locations and insulated ceilings (IC-rated). Suitable for ambient temperatures from -20°C to 40°C (-4°F to 104°F).
• DLC standard approved.
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• Complies with FCC Part 15.
• 5-year warranty of all electronics and housing.MOUNTING KITS
• Optional mounting kits provide for installation on plaster or other hard ceilings.DLC Approval is Required for Most Rebate Programs:
This light is DLC approved. The DesignLights Consortium® promotes quality, performance and energy efficient commercial sector lighting solutions through collaboration among its federal, regional, state, utility, and energy efficiency program members, luminaire manufacturers, lighting designers, and other industry stakeholders throughout the US and Canada. The DLC is a project of Northeast Energy Efficiency Partnerships (NEEP), a regional non-profit which has been bringing stakeholders together since 1996 to accelerate efficiency solutions to create lasting change in the marketplace.
-
LEDQuant
4 inch architectural LED downlight kit, commercial grade, reflector trim and frame, UL, energy star
$82.99
vLEDQuant
4 inch architectural LED downlight kit, commercial grade, reflector trim and frame, UL, energy star
$82.99
Visit product page →The CLADL series is a 4” commercial grade architectural downlight (includes can & frame-in kit). Built for commercial use with architectural frames and a deep cone reflector for precision light. This high-efficiency luminaire provides long life and minimal need for maintenance. UL and Energy Star listed.
FEATURES
• Architectural frames
• C channel and flat hanger bars for tie down to ceiling grids
• Junction box is mounted on the frame for easy wiring,driver access for installation, and replacement
• Diecast aluminum heatsink dissipates heat from the LED board
• Self-flanged aluminum reflector with a frosted lens to shield direct view of LEDs
• Color rendering index ≥ 80
• Long life LEDs - up to 50,000 hours
• Universal 120-277 AC voltage (50/60Hz)
• 0-10V dimming
• Operation Temp. -30°C~40°C (-22°F~104°F)
* Contact factory for other color temperatures and lumen packages.
** L70 hours are IES TM-21-11 calculated hours.
WARRANTY & LISTINGS
• cULus Listed.
• ENERGY STAR® rated.
• Suitable for wet locations (not suitable for coastal/saltwater areas).
• Suitable for damp locations.
• RoHS compliant.
• 5-year warranty of all electronics and housing. -
LEDQuant
6 inch architectural LED recessed downlight kit, commercial grade, reflector trim and frame, UL, energy star
$82.99
vLEDQuant
$82.99
Visit product page →The CLADL series is a 6” commercial grade architectural downlight (includes can & frame-in kit). Built for commercial use with architectural frames and a deep cone reflector for precision light. This high-efficiency luminaire provides long life and minimal need for maintenance. UL and Energy Star listed.
FEATURES
• Architectural frames
• C channel and flat hanger bars for tie down to ceiling grids
• Junction box is mounted on the frame for easy wiring,driver access for installation, and replacement
• Diecast aluminum heatsink dissipates heat from the LED board
• Self-flanged aluminum reflector with a frosted lens to shield direct view of LEDs
• Color rendering index ≥ 80
• Long life LEDs - up to 50,000 hours
• Universal 120-277 AC voltage (50/60Hz)
• 0-10V dimming
• Operation Temp. -30°C~40°C (-22°F~104°F)
* Contact factory for other color temperatures and lumen packages.
** L70 hours are IES TM-21-11 calculated hours.
WARRANTY & LISTINGS
• cULus Listed.
• ENERGY STAR® rated.
• Suitable for wet locations (not suitable for coastal/saltwater areas).
• Suitable for damp locations.
• RoHS compliant.
• 5-year warranty of all electronics and housing. -
Visit product page →The premium-performance CLTR24N-40 is a 2’ x 4’ LED center basket luminaire, which offers industry-leading lumens per watt (LPW), and which is DLC Premium listed. The CLTR24N-40 is designed as a direct replacement for 2’ x 4’ fluorescent luminaires installed in grid ceilings. It is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10 vdc dimming capability.
FEATURES
▪ Available in 3000k (warm white), 3500k (warm/neutral white), 4000k (neutral white) & 5000k (cool white) color temperatures.*
▪ Long-life LEDs provide 199,000 hours of operation with at least 70% of initial lumen output (L70).**
▪ Provides 5,680 luminaire lumens (129 lumens per watt, LPW) at 3000k; 5,743 luminaire lumens (131 LPW) at 3500k; 5,794
luminaire lumens (132 LPW) at 4000k; and 5,894 luminaire lumens (134 LPW) at 5000k.*
▪ Uniform illumination with no visible LED pixelation.
▪ Universal 120-277 AC voltage (50-60Hz) is standard.
▪ 0-10vdc dimming capability is standard.
▪ Power factor > 0.90.
▪ Total harmonic distortion < 20%.
▪ Color rendering index > 80.
▪ Steel housing and acrylic lens.
▪ Easy installation in new construction or retrofit. Fits in standard 2' x 4' grid ceilings.
▪ Standard earthquake clips provide secure installation in grid ceilings.
▪ Standard mounting options include recessed mounting in grid ceilings, or suspended mounting using attached hanging brackets.* Contact factory for other color temperatures and lumen packages.
** L70 hours are IES TM-21-11 calculated hoursWARRANTY & LISTINGS
▪ UL listed for damp locations and insulated ceilings (IC-rated) for use in ambient temperatures from -20°C to 40°C (-4°F to 104°F).
▪ DLC Premium listed.
▪ Flicker-free per IEEE 1789-2015 (low risk of adverse effects of flicker at 100% light output level).
▪ Complies with RoHS (Restriction on Hazardous Substances) requirements.
▪ Complies with FCC Part 15, part B.
▪ Complies with IEEE C.62.41-1991, input transient surge protection (2kV).
▪ 5-year warranty of all electronics and housing. -
LEDQuant
2x4 FT 40W 5000 Lm Flat LED Panel Light 0-10V Dimmable Back-Lit Fixture Rebate ETL & DLC Premium
$84.90
vLEDQuant
2x4 FT 40W 5000 Lm Flat LED Panel Light 0-10V Dimmable Back-Lit Fixture Rebate ETL & DLC Premium
$84.90
Visit product page →The ultra-thin, back-lit LED panel CLFPB24-40 series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10 vdc dimming capability.
FEATURES
• Available in 3500K, 4000K and 5000K color temperatures.
• Long-life LEDs provide 144,000 hours of operation with at least 70% of initial lumens output (L70).**
• CLFPB24-55 provides 5,274 luminaire lumens, and 131 to 135 lumens per watt.
• Uniform illumination with no visible LED pixilation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%
• Color rendering index > 80.
• Aluminum housing.
• PMMA (polymethyl methacrylate) LED lenses with light guide panels for optimal light distribution and efficiency.
• Standard mounting options include recessed mounting in grid ceilings, or suspended mounting using attached hanging brackets. Optional surface mounting requires a surface mounting kit.
• Easy installation in new construction or retrofit.**L70 hours are IES TM-21-11 calculated hours.
WARRANTY/LISTINGS
• ETL listed to applicable U.L. standards for damp locations and insulated ceilings (IC-rated). Suitable for ambient temperatures from -20°C to 40°C (-4°F to 104°F).
• DLC Premium approved.
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• Complies with FCC Part 15.
• 5-year warranty of all electronics and housing.MOUNTING KITS
• Optional mounting kits provide for installation on plaster or other hard
ceilings.DLC Approval is Required for Most Rebate Programs:
This light is DLC approved. The DesignLights Consortium® promotes quality, performance and energy efficient commercial sector lighting solutions through collaboration among its federal, regional, state, utility, and energy efficiency program members, luminaire manufacturers, lighting designers, and other industry stakeholders throughout the US and Canada. The DLC is a project of Northeast Energy Efficiency Partnerships (NEEP), a regional non-profit which has been bringing stakeholders together since 1996 to accelerate efficiency solutions to create lasting change in the marketplace.
-
Visit product page →The CLWAL-40 is a 1’ x 4’ LED wrap luminaire, which is designed as a direct replacement for fluorescent wraps. The CLWAL-40 is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability.
FEATURES
• Available in 3500k (warm/neutral white), 4000k (neutral white) and 5000k (cool white) color temperatures.*
• Long-life LEDs provide 122,000 hours of operation with at least 70% of initial lumen output (L70).**
• Choose from 4,771 luminaire lumens (119 LPW) at 3500k; 5,200 luminaire lumens (130 LPW) at 4000k; and 5,240 luminaire lumens (131 LPW) at 5000k.*
• Uniform illumination with no visible LED pixelation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%.
• Color rendering index > 80.
• Steel housing and acrylic lens.
• Easy installation in new construction or retrofit.*Contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.WARRANTY/LISTING
• cULus listed for damp locations (-20°C to 50°C / -4°F to 122°F).
• DLC premium approved.
• Complies with FCC Part 15, class A.
• Complies with IEEE C.62.41-1991, Class A input transient surge protection (2.5kV).
• Complies with IEC 61000-4-2 level 2 (4kV) electrostatic discharge (ESD).
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• 5-year warranty of all electronics and housing. -
Visit product page →The premium-performance CLTR24D-50 is a 2’ x 4’ LED center basket luminaire, which offers industry-leading lumens per watt (LPW), and which is DLC Premium listed. The CLTR24D-50 is designed as a direct replacement for 2’ x 4’ fluorescent luminaires installed in grid ceilings. It is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10 vdc dimming capability.
FEATURES
▪ Available in 3000k (warm white), 3500k (warm/neutral white), 4000k (neutral white) & 5000k (cool white) color temperatures.*
▪ Long-life LEDs provide 199,000 hours of operation with at least 70% of initial lumen output (L70).**
▪ Uniform illumination with no visible LED pixelation.
▪ Universal 120-277 AC voltage (50-60Hz) is standard.
▪ 0-10vdc dimming capability is standard.
▪ Power factor > 0.90.
▪ Total harmonic distortion < 20%.
▪ Color rendering index > 80.
▪ Steel housing and acrylic lens.
▪ Easy installation in new construction or retrofit. Fits in standard 2' x 4' grid ceilings.
▪ Standard earthquake clips provide secure installation in grid ceilings.
▪ Standard mounting options include recessed mounting in grid ceilings, or suspended mounting using attached hanging brackets.* Contact factory for other color temperatures and lumen packages.
** L70 hours are IES TM-21-11 calculated hoursWARRANTY & LISTINGS
▪ UL listed for damp locations and insulated ceilings (IC-rated) for use in ambient temperatures from -20°C to 40°C (-4°F to 104°F).
▪ DLC Premium listed.
▪ Flicker-free per IEEE 1789-2015 (low risk of adverse effects of flicker at 100% light output level).
▪ Complies with RoHS (Restriction on Hazardous Substances) requirements.
▪ Complies with FCC Part 15, part B.
▪ Complies with IEEE C.62.41-1991, input transient surge protection (2kV).
▪ 5-year warranty of all electronics and housing. -
Visit product page →The CLWPP is a series of premium, rugged, durable LED wall packs, which are ideal solution for outdoor perimeter and area lighting. With a die cast aluminum housing and a polycarbonate lens, the CLWPP wall packs will stand up to many years of punishing environmental conditions. High-efficacy, long-life LEDs provide both energy and maintenance cost savings compared to traditional, HID wall packs.
FEATURES
• Available in 4000k (neutral white) and 5000k (cool white) color temperatures.*
• Long-life LEDs provide 141,000 hours of operation with at least 70% of initial lumen output (L70).**
• CLWPP-35 provides 4,632 lumens & 129 lumens per watt (LPW) at 4000k; or 4,726 lumens & 131 LPW at 5000k.*
• CLWPP-55 provides 7,588 lumens & 133 LPW at 4000k; or 7,728 lumens & 136 LPW at 5000k.*
• CLWPP-80 provides 9,486 lumens & 123 LPW at 4000k; or 9,680 lumens & 126 LPW at 5000k.*
• CLWPP-100 provides 13,065 lumens & 129 LPW at 4000k; or 13,295 lumens & 132 LPW at 5000k.*
• CLWPP-120 provides 15,523 lumens & 130 LPW at 4000k; or 15,787 lumens & 133 LPW at 5000k.*
• Uniform illumination with no visible LED pixelation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%.
• Color rendering index > 80.
• Die cast aluminum housing with dark bronze, powder coat paint.
• Polycarbonate lens with seamless, silicone gasket to prevent leaks
Polycarbonate has F1 rating to avoid discoloration.
• Internal bubble level facilitates level installation.
• Easy installation in new construction or retrofit.
* Contact factory for other color temperatures and lumen packages.
** L70 hours are IES TM-21-11 calculated hours.WARRANTY/LISTING
• cULus listed for wet locations (-20°C to 45°C / -4°F to 113°F)
• IP65 rated
• DLC premium approved
• Complies with FCC Part 15 class B
• Complies with EN61000-4-5, surge immunity (minimum 2kV)
• 5-Year Warranty on all electronics and housing. -
LEDQuant
8 inch architectural LED recessed downlight kit, commercial grade, reflector trim and frame, UL, energy star
$95.99
vLEDQuant
$95.99
Visit product page →The CLADL series is a 8” commercial grade architectural downlight ( includes can & frame-in kit). Built for commercial use with architectural frames and a deep cone reflector for precision light. This high-efficiency luminaire provides long life and minimal need for maintenance. UL and Energy Star listed.
FEATURES
• Architectural frames
• C channel and flat hanger bars for tie down to ceiling grids
• Junction box is mounted on the frame for easy wiring,driver access for installation, and replacement
• Diecast aluminum heatsink dissipates heat from the LED board
• Self-flanged aluminum reflector with a frosted lens to shield direct view of LEDs
• Color rendering index ≥ 80
• Long life LEDs - up to 50,000 hours
• Universal 120-277 AC voltage (50/60Hz)
• 0-10V dimming
• Operation Temp. -30°C~40°C (-22°F~104°F)
* Contact factory for other color temperatures and lumen packages.
** L70 hours are IES TM-21-11 calculated hours.
WARRANTY & LISTINGS
• cULus Listed.
• ENERGY STAR® rated.
• Suitable for wet locations (not suitable for coastal/saltwater areas).
• Suitable for damp locations.
• RoHS compliant.
• 5-year warranty of all electronics and housing. -
LEDQuant
2x4 FT 55W 7000 Lm Flat LED Panel Light 0-10V Dimmable Back-Lit Fixture Rebate ETL & DLC Premium
$96.99
vLEDQuant
2x4 FT 55W 7000 Lm Flat LED Panel Light 0-10V Dimmable Back-Lit Fixture Rebate ETL & DLC Premium
$96.99
Visit product page →The ultra-thin, back-lit LED panel CLFPB24-55 series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores, and is the perfect choice for both new construction and retrofits. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10 vdc dimming capability.
FEATURES
• Available in 3500K, 4000K and 5000K color temperatures.
• Long-life LEDs provide 144,000 hours of operation with at least 70% of initial lumens output (L70).**
• CLFPB24-55 provides 7,442 luminaire lumens, and 131 to 135 lumens per watt.
• Uniform illumination with no visible LED pixilation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%
• Color rendering index > 80.
• Aluminum housing.
• PMMA (polymethyl methacrylate) LED lenses with light guide panels for optimal light distribution and efficiency.
• Standard mounting options include recessed mounting in grid ceilings, or suspended mounting using attached hanging brackets. Optional surface mounting requires a surface mounting kit.
• Easy installation in new construction or retrofit.**L70 hours are IES TM-21-11 calculated hours.
WARRANTY/LISTINGS
• ETL listed to applicable U.L. standards for damp locations and insulated ceilings (IC-rated). Suitable for ambient temperatures from -20°C to 40°C (-4°F to 104°F).
• DLC Premium approved.
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• Complies with FCC Part 15.
• 5-year warranty of all electronics and housing.MOUNTING KITS
• Optional mounting kits provide for installation on plaster or other hard
ceilings.DLC Approval is Required for Most Rebate Programs:
This light is DLC approved. The DesignLights Consortium® promotes quality, performance and energy efficient commercial sector lighting solutions through collaboration among its federal, regional, state, utility, and energy efficiency program members, luminaire manufacturers, lighting designers, and other industry stakeholders throughout the US and Canada. The DLC is a project of Northeast Energy Efficiency Partnerships (NEEP), a regional non-profit which has been bringing stakeholders together since 1996 to accelerate efficiency solutions to create lasting change in the marketplace.
-
Visit product page →The CLWM wall pack series is an economical solution for outdoor perimeter and area lighting. With a builtin photocell, and a polycarbonate housing and lens, the CLWM is a versatile and durable outdoor luminaire. High-efficacy, long-life LEDs provide both energy and maintenance cost savings compared to traditional, HID wall packs.
FEATURES
• Available in 4000k and 5000k color temperatures.*
• 06-LEDWPPC20W delivers 1,031 lumens and 45 lumens per watt (LPW).*
• Universal 120-277 AC voltage (50-60Hz) is standard.
• Built-in, button-type photocell (120 AC voltage only).
• Power factor > 0.90.
• Total harmonic distortion < 20%.
• Color rendering index > 70.
• Polycarbonate housing with a painted, die cast aluminum back plate, and a seamless gasket to prevent leaks.
• Fluted, polycarbonate lens for even light distribution.
• Easy installation in new construction or retrofit.
* Contact factory for other color temperatures and lumen packages.WARRANTY/LISTINGS
• cULus listed for wet locations (-20°C to 40°C / -4°F to 104°F).
• IP54 rates.
• Complies with FCC Part 15, Class B.
• 3-year warranty on all electronics and housing. -
Visit product page →The CLWP Series is a rugged, durable LED wall pack that provides full adjustability of the LED module, so light can be focused up, down, or anything in between. It is perfect for outdoor perimeter and area lighting. With a die cast aluminum housing and a polycarbonate lens, the CLWP Series will stand up to many years of punishing environmental conditions. High-efficacy, long-life LEDs provide both energy and maintenance cost savings compared to traditional, HID wall packs.
FEATURES
• Available in 4000k (neutral white) and 5000k (cool white) color temperature.*
• Long-life LEDs provide 61,000 hours of operation with at least 70% of initial lumens output (L70).**
• LEDWPA25 provides 3,325 lumens and 133 lumens per watt (LPW) at 4000k, or 3,280 lumens and 131 LPW at 5000k.*
• Uniform illumination with no visible LED pixilation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%.
• Color rendering index > 70.
• Die cast aluminum housing with durable, dark bronze, powder coat paint.
• Polycarbonate lens with seamless, silicone gasket to prevent leaks.
• Easy installation in new construction or retrofit.WARRANTY/LISTING
• cULus listed for wet locations (-20°C to 40°C / -4°F to 113°F)
• DLC Premium approved
• IP65 rated
• Complies with FCC Part 15, class B.
• Complies with EN61000-4-5, surge immunity (1kV minimum)
• 5-year warranty of all electronics and housing -
Visit product page →The CLWM wall pack series is an economical solution for outdoor perimeter and area lighting. With a builtin photocell, and a polycarbonate housing and lens, the CLWM is a versatile and durable outdoor luminaire. High-efficacy, long-life LEDs provide both energy and maintenance cost savings compared to traditional, HID wall packs.
FEATURES
• Available in 4000k and 5000k color temperatures.*
• 06-LEDWPPC20W delivers 2,400 lumens and 45 lumens per watt (LPW).*
• Universal 120-277 AC voltage (50-60Hz) is standard.
• Built-in, button-type photocell (120 AC voltage only).
• Power factor > 0.90.
• Total harmonic distortion < 20%.
• Color rendering index > 70.
• Polycarbonate housing with a painted, die cast aluminum back plate, and a seamless gasket to prevent leaks.
• Fluted, polycarbonate lens for even light distribution.
• Easy installation in new construction or retrofit.
* Contact factory for other color temperatures and lumen packages.WARRANTY/LISTINGS
• cULus listed for wet locations (-20°C to 40°C / -4°F to 104°F).
• IP54 rates.
• Complies with FCC Part 15, Class B.
• 3-year warranty on all electronics and housing. -
Visit product page →The CLWPP is a series of premium, rugged, durable LED wall packs, which are ideal solution for outdoor perimeter and area lighting. With a die cast aluminum housing and a polycarbonate lens, the CLWPP wall packs will stand up to many years of punishing environmental conditions. High-efficacy, long-life LEDs provide both energy and maintenance cost savings compared to traditional, HID wall packs.
FEATURES
• Available in 4000k (neutral white) and 5000k (cool white) color temperatures.*
• Long-life LEDs provide 141,000 hours of operation with at least 70% of initial lumen output (L70).**
• CLWPP-35 provides 4,632 lumens & 129 lumens per watt (LPW) at 4000k; or 4,726 lumens & 131 LPW at 5000k.*
• CLWPP-55 provides 7,588 lumens & 133 LPW at 4000k; or 7,728 lumens & 136 LPW at 5000k.*
• CLWPP-80 provides 9,486 lumens & 123 LPW at 4000k; or 9,680 lumens & 126 LPW at 5000k.*
• CLWPP-100 provides 13,065 lumens & 129 LPW at 4000k; or 13,295 lumens & 132 LPW at 5000k.*
• CLWPP-120 provides 15,523 lumens & 130 LPW at 4000k; or 15,787 lumens & 133 LPW at 5000k.*
• Uniform illumination with no visible LED pixelation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%.
• Color rendering index > 80.
• Die cast aluminum housing with dark bronze, powder coat paint.
• Polycarbonate lens with seamless, silicone gasket to prevent leaks
Polycarbonate has F1 rating to avoid discoloration.
• Internal bubble level facilitates level installation.
• Easy installation in new construction or retrofit.
* Contact factory for other color temperatures and lumen packages.
** L70 hours are IES TM-21-11 calculated hours.WARRANTY/LISTING
• cULus listed for wet locations (-20°C to 45°C / -4°F to 113°F)
• IP65 rated
• DLC premium approved
• Complies with FCC Part 15 class B
• Complies with EN61000-4-5, surge immunity (minimum 2kV)
• 5-Year Warranty on all electronics and housing. -
Visit product page →The CLCPY series LED canopy luminaire is a premium-performance solution for illuminating parking garages, storage areas, stairwells, and other applications requiring a low-profile luminaire that can be surface or pendant mounted. With a die cast aluminum housing and a polycarbonate lens, the CLCPY will stand up to many years of punishing environmental conditions. High-efficacy, long-life LEDs provide both energy and maintenance cost savings compared to traditional canopy lights with HID, fluorescent or incandescent lamps.FEATURES▪ Available in 4000K (neutral white) and 5000K (cool white) color temperatures.*
▪ Long-life LEDs provide at least 170,000 hours of operation with at least 70% of initial lumen output (L70).**
▪ Provides a range of 3,137 to 12,708 lumens.*
▪ Universal 120-277 AC voltage (50-60Hz) is standard.
▪ 0-10vdc dimming drivers are standard.
▪ Mounting options include surface-mounting and pendant-mounting using electrical conduit.
▪ Optional, integral Merrytek microwave occupancy/daylight sensor is installed inside the luminaire housing, and provides both on/off and dimming functions. To order, add the suffix “OS” to your luminaire catalog number (see examples below).
▪ Power factor > 0.90.
▪ Total harmonic distortion < 20%.
▪ Color rendering index > 80.
▪ Die cast aluminum housing, painted white or dark bronze.
▪ Easy installation in new construction or retrofit.
* Refer to datasheet below for color temperatures and lumen packages.
** L70 hours are IES TM-21-11 calculated hours.WARRANTY & LISTINGS▪ cULus listed for wet locations in ambient temperatures from-20°C to 55°C (-4°F to 131°F).▪ DLC certified▪ IP65 rated for ingress protection.
▪ Complies with FCC Part 15, class B.
▪ Complies with EN61000-4-5, surge immunity protection; all other models at 4kV.
▪ 5-Year Warranty of all electronics and housing. -
Visit product page →The CLLSR retrofit strip lights are designed to transform existing fluorescent strips into high performance LED luminaires. The CLLSR series is designed to deliver general ambient lighting in a variety of indoor settings, including schools, offices, hospitals and stores. This high-efficacy luminaire provides long-life and uniform illumination, as well as standard 0-10vdc dimming capability.
FEATURES
• Available in 3500k (warm/neutral white), 4000k (neutral white) and 5000k (cool white) color temperatures.*
• Long-life LEDs provide 122,000 hours of operation with at least 70% of initial lumen output (L70).**
• Provides 5,842 luminaire lumens (123 lumens per watt, LPW) at 3500k; 5,980 luminaire lumens
(130 LPW) at 4000k; and 6,026 luminaire lumens (131 LPW) at 5000k.*
• Uniform illumination with no visible LED pixelation.
• Universal 120-277 AC voltage (50-60Hz) is standard.
• 0-10vdc dimming capability is standard.
• Power factor > 0.90.
• Total harmonic distortion < 20%.
• Color rendering index > 80.
• Steel housing and acrylic lens.
• Easy installation in existing fluorescent strip housings* Contact factory for other color temperatures and lumen packages.
** L70 hours are IES TM-21-11 calculated hours.
WARRANTY/LISTINGS
• cULus approved for damp locations (-20 °C to 50 °C / -4 °F to 122 °F).
• DLC premium approved.
• Complies with FCC Part 15, Class A.
• Complies with IEEE C.62.41-1991, Class A input transient surge protection (2.5kV).
• Complies with IEC 61000-4-2 level 2 (4kV) electrostatic discharge (ESD).
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• 5-year warranty of all electronics and housing. -
Visit product page →The CLHB-LF-90 is a full-body, premium-performance LED high bay luminaire. It is designed to illuminate a wide variety of settings, including commercial, industrial & retail settings such as warehouses, manufacturing plants, sporting venues and big-box retailers. With a painted, steel housing, the CLHB-LF-90 provides durability and high performance. High-efficacy, long-life LEDs provide both energy and maintenance cost savings compared to traditional, HID high bays.
FEATURES
• Available in 4000k (neutral white) and 5000k (cool white) color temperature.*
• Long-life LEDs provide 122,000 hours of operation with at least 70% of initial lumens output (L70).**
• Delivers 12,420 lumens (138 lumens per watt, LPW) at 4000k, and 12,600 lumens (140 LPW) at 5000k.*
• Universal 120-277 AC voltage (50-60Hz) is standard.
• Power factor > 0.90.
• 0-10vdc dimming drivers are standard.
• Total harmonic distortion < 20%
• Color rendering index > 80.
• Painted steel housing.
• Easy installation in new construstion or retrofit.
• Chain-mount kits (includes v-hooks and ⅛“ thick, 1-meter long chain) are standard.
• Options include lenses (clear & diffused), wire-guard kits, surface-mounting kits, pendant-mounting kits, and cable-mounting kits.* contact factory for other color temperatures and lumen packages.
**L70 hours are IES TM-21-11 calculated hours.MOUNTING
• Chain mounting with V-hooks is standard.
• Optional surface mounting kit provides attachment to flat ceilings.
• Optional pendant mounting kit provides pendant attachment to junction boxes.
• Optional cable mounting kits provide suspension at two lengths (i.e., 3 & 5 meters).WARRANTY/LISTING
• cULus listed for damp locations in ambient temperatures from -20°C to 50°C (-4°F to 122°F).
• DLC Premium approved.
• Complies with FCC Part 15, class B.
• Complies with IEEE C.62.41-1991, input transient protection (2.5kV).
• 5-year warranty
- Previous
- Page 1 of 2
- Next